|
Post by gsxhartley on Jul 18, 2014 7:05:03 GMT
There was a write up on the old site showing how to swap the clutch from a 600 gixer into a bandit 1200. Does anyone have a link or anyone that has done it. I've both clutch's so need to know what parts to use and the length of the clutch push rod. Thanks in advance, Dave H
|
|
|
Post by katana on Jul 19, 2014 11:00:23 GMT
You sure? Can't imagine any 600 clutch would last with 1100 / 1200's torque output! The 1100 spring for 1100 diaphragm change is the one most peeps do?
|
|
|
Post by gsxhartley on Jul 19, 2014 19:41:43 GMT
I'm 100% sure. Well I was til you said that. Reason being that it does away with the diaphragm clutch. I've both clutch's but couldn't be bothered to do the measurements but look's like I'll have to. No worries, I'll let you all know when the engine blows. Watch this space.
|
|
|
Post by buddy on Jul 20, 2014 14:15:15 GMT
|
|
|
Post by gsxhartley on Jul 20, 2014 18:43:52 GMT
Buddy, your star. That's exactly what I was looking for. Seems I was wrong about 600 and it was the 750. Not a problem, just checked and I do have the 750 clutch. Many many thanks.
|
|