zookrick
Oviraptor
Posts: 11
Reg: Mar 29, 2014 21:15:16 GMT
|
Post by zookrick on Dec 19, 2014 1:07:32 GMT
Someone mentioned you could use an intake cam on the exhaust side by turning the sprocket on the cam mounts. Anyone ever done that or heard of it? Was thinking I could use my 88 gsxr 750 cam on the intake side and a kat 1100 intake cam on the exhaust side on my 750 kat.
|
|
|
Post by cregnybaa on Dec 19, 2014 11:11:02 GMT
A long time ago 20yrs plus i took the inlet cam out of my 1100 et and put it in the exhaust and then fitted a cam from a 750 in the inlet i can't remember which 750 it was but it did make a noticable differance. This practice was very common for the steel framed 600 Honda.
|
|
|
Post by katana on Dec 19, 2014 15:03:43 GMT
Common hop up trick with Busa's so logic says its possible - give it a try?
|
|
|
Post by gsx on Dec 19, 2014 17:40:02 GMT
Thought 750 cams were the hot ones ??
|
|
|
Post by canamant on Dec 21, 2014 15:40:39 GMT
The "hot" cam is only the 88/89 short stroke GSXR750 J/K. Teapot 750s have the short stroke engine but different camshafts.
|
|
gooroo
Oviraptor
Posts: 10
Reg: Oct 4, 2013 13:50:41 GMT
|
Post by gooroo on Dec 23, 2014 10:44:17 GMT
I wouldn't suggest in an engine with rockers. Opening profile could become too aggressive.
|
|
|
Post by katana on Dec 23, 2014 16:26:45 GMT
I wouldn't suggest in an engine with rockers. Opening profile could become too aggressive. So QED - it would be too aggressive for the inlet rockers also? Bear in mind the inlet valve weighs a bit more than the exhaust as its larger so is marginally easier to accelerate thus less stress on the rockers?
|
|