|
Post by teaman on Mar 25, 2015 19:38:35 GMT
Evening fellas
I am having some difficulty setting the choke when starting up the bandit.. Either it revs too high, or it is not getting enough choke.. It doesn't operate smoothly, it's very hard to find the perfect spot in between.. Is this a normal bandit thing, or is there a fix???
Thanks
|
|
|
Post by slim on Mar 26, 2015 0:08:21 GMT
The bar lever gets full of crud & sticks the cable dries out or stretches & the slider on the carbs either gets full of crud or in the case of those with them fitted destroy the little plastic slider washers allowing it to twist & stick
usually a good clean & oil/grease + maybe a cable sorts it
|
|
|
Post by teaman on Mar 26, 2015 14:37:03 GMT
I have already cleaned the bar lever and checked that the Choke on the carbs run smoothly, also new cable, but it's not fitted as it seems too short. Im doing the Choke by hand, but no matter how gentle I am it just seems to engage too suddenly
|
|