|
Post by pogger on Apr 20, 2015 0:10:47 GMT
I'm building a gsxr7-11 using a 750 frame would like to fit a braced swingarm of some sort just wondered what options there are with minimal work involved? Cheers
|
|
|
Post by rusty on Apr 20, 2015 5:33:09 GMT
Depends on which 750 frame your using..if your using a w/c frame then maybe the 94/95 braced 750 swing arm would fit fine but I'm sure you'll get more info shortly:-)
|
|
|
Post by caferacerdan on Apr 20, 2015 10:41:51 GMT
if you already have a 750 swingarm you can buy an early fireball or r1 swingarm and chop the brace off it and get it welded onto the 750 arm. cheap solution that still looks good!
|
|
|
Post by pogger on Apr 20, 2015 11:50:43 GMT
Its a gsxr750 m oil cooled one of the last before the went all wet :-)
|
|
recardo
Velociraptor
Posts: 34
Reg: May 5, 2014 15:45:47 GMT
|
Post by recardo on Apr 28, 2015 20:56:17 GMT
would be interested to know whats involved in fitting a SRAD or water cooled slingshot arm into a 750M as well?
|
|
beam
Oviraptor
Posts: 3
Bikes: GSXR 750 M
Reg: Apr 22, 2015 17:24:51 GMT
|
Post by beam on Apr 30, 2015 8:16:18 GMT
to fit a water cooled swinging arm 95 to my oil cooled GSXR 91 i did this 95 swinging arm and wheel axle and chain adjusters 95 swinging arm bushes 95 rear brake and bracket 91 swinging arm bushes stainless tube / push bike handle bars you will also have to cut down the 91 dog bones and it all fit together like this and you will also have to move the battery , so i did this
|
|