|
Post by scara on Dec 10, 2013 23:32:25 GMT
|
|
ozychris
Oviraptor
Posts: 5
Reg: Apr 18, 2013 17:46:25 GMT
|
Post by ozychris on Dec 13, 2013 16:27:13 GMT
Nice looking project mate. I'll be home in WA next week. Heading down south to see the family for Chrimbo.
|
|
|
Post by Kristjan on Dec 13, 2013 16:59:16 GMT
You need new tig-welded turbo header with all these shining red engine cases and polished parts. That black piece with it's ugly angles and welding job will work but it ruins the picture. Otherwise, it's wery well done.
|
|
|
Post by scara on Dec 15, 2013 6:50:49 GMT
Cheers for the concern, however there is plenty more to do here. This is how it came out of the box, its not how its going to look on the motor though. I agree, its terrible in the overall picture. Gotta walk before I can run.............. Putting some much needed parts on the motor today, moved the engine onto a thin stand, and the frame back into the workshop after having some mods done to finish up. Spools, Under tray for the electrics / fuel pump etc; a new axle nut was machined up; and finally the centre mast for the stop lock on the triple was re-done. Had to change the triple tree out for another as it was bent, remember ?
|
|
|
Post by scara on Dec 27, 2013 11:52:47 GMT
Ignition sneakily placed under the tank rear end, along side a new fuel pump Will be extending the underside of the tank to allow for more fuel. Theres a giant hump inside where the original air filter fitted in, will be doing a cut out and flat sheet replacement - I anticipate it should allow an extra 10 litres of fuel there abouts.
|
|
Deleted
Posts: 0
Reg: Apr 24, 2024 12:36:02 GMT
|
Post by Deleted on Dec 27, 2013 15:22:59 GMT
i am glad too see you are keeping up the thread. nice pic,s
|
|
|
Post by B2BC on Dec 27, 2013 15:39:21 GMT
where did you get them cam links from
|
|
|
Post by stuey on Dec 27, 2013 16:59:04 GMT
well tidy and super shiney
|
|
|
Post by jaydee on Dec 28, 2013 19:17:20 GMT
|
|
|
Post by scara on Dec 29, 2013 11:22:07 GMT
|
|
|
Post by scara on Dec 29, 2013 11:23:35 GMT
Due to my location, I chose GSXR Zone over Star Racing because of the cost of shipping. There was $10 in the price of the part but $50 in the cost of shipping to me,
|
|
|
Post by scara on Dec 29, 2013 11:26:43 GMT
|
|
|
Post by B2BC on Dec 29, 2013 11:57:08 GMT
cool xmas present
|
|
|
Post by jaydee on Dec 29, 2013 22:52:06 GMT
|
|
godzilla
Oviraptor
Posts: 1
Reg: Dec 30, 2013 9:56:30 GMT
|
Post by godzilla on Dec 30, 2013 10:04:43 GMT
|
|