|
Post by nitro on Jun 3, 2013 15:50:24 GMT
Think it´s a turbocharger issue, but not sure. That´s why I buil this Hybrid of china GT1549S and Garrett GT2256V. Now GT1556S. But not sure if this will work.
|
|
|
Post by nitro on Aug 20, 2013 11:38:09 GMT
Found the reason for my high boost problem. I removed the air filters from the turbo and it was gone Want to lower the fuel pump. I hope I don´t have to race with half full tank.
|
|
willbarber
Oviraptor
Posts: 4
Reg: Sept 19, 2013 18:39:46 GMT
|
Post by willbarber on Oct 29, 2013 22:22:52 GMT
Engine is still stutters at high boost, like last year. If it's still stuttering then close down your plug gaps to 0.45mm!!
|
|
|
Post by nitro on Oct 30, 2013 11:36:21 GMT
I also thounght to try this, but the first times I drove with 1.3 bar, there was no problem. It becams worse and worse... Also I tried plugs without resistor and it changed nothing. It also gets better, when I demount the air filters, so i think it´s not an issue of the spark plugs IMO. I think it´s a problem of this small turbos.
|
|
|
Post by Kristjan on Nov 21, 2013 11:30:01 GMT
Do you have the basic version of ignijet or one of the more expensive ones? Basic will work with quickshifter?
|
|
|
Post by nitro on Nov 21, 2013 15:52:21 GMT
This is full version (shift light, traction control, etc...). I bought also a B-version for my Bandit and CBR just for quickshifter Basic version wount work with quickshifter, except you have a separate quickshifter module.
|
|
mikak
Oviraptor
Posts: 5
Bikes: Twincharger Gsx-r 1100 & Gsx-r 750W
Reg: Nov 17, 2013 11:18:29 GMT
|
Post by mikak on May 10, 2014 11:27:14 GMT
Which rounds gt1549 turbos wake up? Have you been to dyno yet?
|
|
|
Post by nitro on May 12, 2014 12:53:31 GMT
appr. 3000 starts boost and full reached at 6000rpm.
|
|
|
Post by nitro on Jun 10, 2014 10:36:56 GMT
Put in a new engine - nearly same parts, but with mild austrian cams, for more bottom end power. But the comb with the GT1549 is more laggy now, because of less engine VE. So I have to fit the old Garrett GT1544 or put in a more aggr. exhaust cam (or may be both cams).
|
|