mx13
Velociraptor
TGSX-R 711 in editing mode
Posts: 21 
Bikes: Slabby 711t
|
Post by mx13 on Dec 30, 2013 17:26:10 GMT
Hello Here you are my extremely low budget turbo project. It is Slabby 750 frame with 750W fork and wheels+ 6pistons calipers + 1127 engine + turbo form BMW X6 5.0 /one of them/    new bearings inside   -2mm Today I've started building the exhaust manifold pics soon! |
|
|
|
Post by mozza on Dec 30, 2013 20:58:13 GMT
Looks like an interesting project. Keep the pictures coming!!!
|
|
montela
Velociraptor
Posts: 47
|
Post by montela on Dec 31, 2013 4:15:12 GMT
how much power you plan on running as if its anywere near 200hp your gunna need a longer arm or the front wheels gunna be in the air alot |
|
mx13
Velociraptor
TGSX-R 711 in editing mode
Posts: 21
Bikes: Slabby 711t
|
Post by mx13 on Dec 31, 2013 9:16:20 GMT
how much power you plan on running as if its anywere near 200hp your gunna need a longer arm or the front wheels gunna be in the air alot The plan is about 250 on the wheel. The bike will be generally build for fun and speed wheelies, the only thing which worries me is the frame. It is in perfect condition, but I'm not convinced that it is capable to hold that heart! Regards, Martin |
|
mx13
Velociraptor
TGSX-R 711 in editing mode
Posts: 21
Bikes: Slabby 711t
|
Post by mx13 on Jan 3, 2014 16:53:57 GMT
|
|
|
|
Post by willo on Jan 4, 2014 10:50:16 GMT
250bhp on wheel base that short?.....  , best of luck with that, you might as well ditch first second third and fourth gear, they will be useless..... 
Les! |
|
|
|
Post by fula28 on Jan 4, 2014 11:18:30 GMT
209bhp 11lbs torque no real wheelies and 10.35 run at pod no wheelies only if you tugged the bars , would smoke most 1ltr super bikes easy!!! Std arm std frame 17" wheels good rubber and proper shock I ran r1 shock with k-tech spring, awesome you will be fine I used 15-44 gearing, and that was bob on! 14-44 for short circuit stuff! Oh get headstock welded I.e filled in as they can flex here also.  |
|
|
|
Post by willo on Jan 4, 2014 12:25:52 GMT
Your a better man than me fula, I ran 10.5 on a standard wheel base 1216 bandit, with about 150bhp, wheelied in first and second on half throttle or more, and was wheeling in third on full throttle.....
Anything spirited with movement of my right wrist in first and mine wheelies, even in second its pretty easy, I do run 14 front sprocket tho....
Les!
|
|
rustychain
Velociraptor
Posts: 46
|
Post by rustychain on Jan 4, 2014 13:30:27 GMT
looking good more piks
|
|
|
|
Post by katana on Jan 4, 2014 14:08:13 GMT
250bhp on wheel base that short?..... , best of luck with that, you might as well ditch first second third and fourth gear, they will be useless.....
Les! So 370hp in this is not good either? AMS1000 is a wise investment!    |
|
mx13
Velociraptor
TGSX-R 711 in editing mode
Posts: 21
Bikes: Slabby 711t
|
Post by mx13 on Jan 5, 2014 8:17:49 GMT
What you mean, also may I have a pic of your tank, pls? |
|
|
|
Post by willo on Jan 6, 2014 10:46:22 GMT
Oh I didn't say its no good, power is good, just not as easy to put down in a standard wheel base.....
Les! |
|
|
|
Post by busaash on Jan 6, 2014 11:55:34 GMT
209bhp 11lbs torque no real wheelies and 10.35 run at pod no wheelies only if you tugged the bars , would smoke most 1ltr super bikes easy!!! Std arm std frame 17" wheels good rubber and proper shock I ran r1 shock with k-tech spring, awesome you will be fine I used 15-44 gearing, and that was bob on! 14-44 for short circuit stuff! Oh get headstock welded I.e filled in as they can flex here also. bike looks mean and nice colour scheme too |
|
tizik
Oviraptor
Posts: 5
Bikes: 1986 GSX-R 1100, 1986 GSX-R 1100, 2001 R6 Streetfighter
|
Post by tizik on Feb 15, 2014 17:20:54 GMT
Nice build so far. I'm curious what your plans are for the plenum. Have you got that far yet?
|
|
mx13
Velociraptor
TGSX-R 711 in editing mode
Posts: 21
Bikes: Slabby 711t
|
Post by mx13 on Nov 12, 2014 17:24:20 GMT
|
|
, best of luck with that, you might as well ditch first second third and fourth gear, they will be useless..... 
