|
Post by 11ef on Feb 22, 2014 6:45:31 GMT
Here's the beginnings of my next project, front & rear mods first then who knows?? The project The donor Should be fun
|
|
|
Post by busaash on Feb 22, 2014 9:27:48 GMT
good starting point , and should be able to use the exhaust too
|
|
|
Post by 11ef on Feb 22, 2014 15:46:36 GMT
Thought about that until my mate bought the engine & zorst for his 7/11 project. Sure something else juicy will turn up
|
|
|
Post by 11ef on Feb 23, 2014 6:39:47 GMT
Stripped, shock mounting next
|
|
|
Post by 11ef on Feb 24, 2014 16:23:44 GMT
|
|
|
Post by 11ef on Apr 15, 2014 19:47:00 GMT
Decided to go with 2 pack rather than powder coating. Parts back ready to go, threw a set of Armstrong wavy's on for good measure and a set of maxxi boots. Started on the build, lost a few photo's on the the way Threw a set of Armstrong wavy's on for good measure and a set of maxxi boots. Front end on using the 1100m & wp wheel Back end on / engine in. Used Efe hub & wp spacer to kill the rather large offset. Leaving a very slight mod to the front sprocket 750 wp shock fitted In with the loom Chuck on the spare tank Steering stops, first attempt; Works pretty well, need to change the washer piles for a decent bush tho. Next few steps for another day 1, overcome the foot peg hangers, swinger much wider than stock ? 2, get a set of custom dogbones made 220 centres 3, ignition, clock & headlight mounts
|
|
|
Post by captain chaos on Apr 16, 2014 6:31:24 GMT
Looking good
|
|
|
Post by homer711 on Apr 29, 2014 16:22:02 GMT
Next few steps for another day 1, overcome the foot peg hangers, swinger much wider than stock ? -grind them... I got just enough room when I grind the foot peg mount few millimeters
|
|
|
Post by 11ef on May 19, 2014 16:41:29 GMT
Next few steps for another day 1, overcome the foot peg hangers, swinger much wider than stock ? -grind them... I got just enough room when I grind the foot peg mount few millimeters Took a grinder to the brake pedal hanger, gave me a couple of millimeters. Job done cheers
|
|
|
Post by 11ef on Jun 15, 2014 16:26:30 GMT
Back end sorted New front muddy Bars & clocks done New std headlight Stainless headers & link pipe Chain & sprockets, brake lines, exhaust can all ordered Rs 38's & bodywork and some small touches to finish
|
|
|
Post by busaash on Jun 15, 2014 20:07:46 GMT
Looks really good nice build
|
|
|
Post by 11ef on Jun 19, 2014 18:00:46 GMT
Looks really good nice build Cheers Temporary can fitted until I get something more interesting RS38's & K&N's fitted 530 conversion fitted 16/48, chain rubbing on swing arm. 18t ordered should do the trick (fingers crossed) Brake lines to order once I'm happy with the length
|
|
|
Post by clivegto on Jun 20, 2014 20:03:01 GMT
Looks good, nice work.
|
|
|
Post by 11ef on Jul 5, 2014 18:07:43 GMT
Just about there now, starting to look the part. Paintwork all fitted and running sweet. A small change to the sprocket set up & longer chain and its done. Mot next week :-)
|
|
Deleted
Posts: 0
Reg: Apr 23, 2024 22:19:43 GMT
|
Post by Deleted on Jul 6, 2014 10:40:40 GMT
look,s good now. white wheels set it off........[pain to keep clean] hope the mot goes ok
|
|