gixxerjai
Oviraptor
Posts: 8 
Bikes: GSXR 1000 K1, GSXR 400 x3, 1200 Bandit Project, Chop Project
|
Post by gixxerjai on Mar 20, 2014 22:18:54 GMT
Hi All,
I've had a search and can't find what i'm unsure of.
I have a 750 SRAD front end for my bandit, however, don't have the wheel and discs.
Are any other wheels and discs the same? I can get my hands on a 600 srad wheel and discs if i want but not sure if it's the same?
Any help would be appreciated.
Cheers,
Jai.
|
|
gixxerjai
Oviraptor
Posts: 8
Bikes: GSXR 1000 K1, GSXR 400 x3, 1200 Bandit Project, Chop Project
|
Post by gixxerjai on Mar 20, 2014 23:14:43 GMT
It's actually a K1 600 wheel and discs?
|
|
|
|
Post by fatblokeonbandit on Mar 21, 2014 8:09:03 GMT
srad 60/750/ tl1000s/r and early hayabusa are all the same fitment, the k series need spacers..I had an srad 600 front in my TL1000s
|
|
|
|
Post by jonny on Mar 21, 2014 10:52:13 GMT
srad 60/750/ tl1000s/r and early hayabusa are all the same fitment, the k series need spacers..I had an srad 600 front in my TL1000s Doesn't depend on the year? I though early 600/750 wheels were only 5.5in and the later ones were 6in? |
|
|
|
Post by fatblokeonbandit on Mar 21, 2014 11:10:51 GMT
hes on about fronts... the rears were all 6 inch except the srad 600 which was a 5.5 incher, I fitted one to my TL race bike to make it turn in quicker, it worked a treat...
|
|
|
|
Post by jonny on Mar 21, 2014 17:27:36 GMT
I must learn to read properly  |
|
gixxerjai
Oviraptor
Posts: 8
Bikes: GSXR 1000 K1, GSXR 400 x3, 1200 Bandit Project, Chop Project
|
Post by gixxerjai on Mar 21, 2014 22:49:59 GMT
srad 60/750/ tl1000s/r and early hayabusa are all the same fitment, the k series need spacers..I had an srad 600 front in my TL1000s Cheers mate, much appreciated. |
|
