gillybobs
Oviraptor
Posts: 4
Reg: Apr 19, 2013 11:55:34 GMT
|
Post by gillybobs on Apr 19, 2013 12:01:49 GMT
Been working on my wn for a few months. While trying trying the lights out after refitting them i left the ignition on over night Now I dont seem to have a spark. Been throught the electrics as per manual and seem to get power where there should be power and resistances on all the coils seem right. Could leaving the ignition on over night have fryed the cdi ignition box on the bike??
|
|
|
Post by mightlife on Apr 19, 2013 14:36:41 GMT
Kill switch?
hehe
|
|
gillybobs
Oviraptor
Posts: 4
Reg: Apr 19, 2013 11:55:34 GMT
|
Post by gillybobs on Apr 19, 2013 14:47:43 GMT
Been through the kill switches and side stande switches there working fine! Good call though stupider things have happend!!
|
|
|
Post by mightlife on Apr 19, 2013 15:01:17 GMT
Been through the kill switches and side stande switches there working fine! Good call though stupider things have happend!! Especially to me Sorry I can't offer any real advice. Good luck though.
|
|
jimbob43
Oviraptor
Posts: 2
Reg: Apr 18, 2013 18:05:26 GMT
|
Post by jimbob43 on Apr 21, 2013 9:27:52 GMT
Side stand diode??
|
|
gillybobs
Oviraptor
Posts: 4
Reg: Apr 19, 2013 11:55:34 GMT
|
Post by gillybobs on Apr 21, 2013 17:57:13 GMT
Well had the bike running today! Turned out to be corroded terminals going to the igniter box. Spent hours cleaning them with a small screw driver and contact cleaner!
|
|