|
|
Post by richardgs1000 on Aug 13, 2014 20:18:43 GMT
a mate has nicely volunteered me into fitting another engine to a blown srad 600 the problem is that the engine supplied is a 750 fuel injected motor can it be converted to carbs if so how
the only difference I can see is there is no vacume feed for the fuel tap and there are some holes above the exhaust ports any help would be appreciated
cheers
Richard |
|
|
|
Post by kokolis on Aug 15, 2014 17:48:29 GMT
You can use the balancing screw of one the carbs and make a threaded nossle
|
|
Deleted
Posts: 0
Reg: Apr 25, 2024 6:04:53 GMT
|
Post by Deleted on Aug 15, 2014 20:50:22 GMT
why not fit all the injection stuff? that,s what i did smiley-shocked003
|
|
|
|
Post by kokolis on Aug 17, 2014 8:33:28 GMT
Could, but you will need the injection loom and module also.
|
|
|
|
Post by captain chaos on Aug 17, 2014 9:16:32 GMT
Could, but you will need the injection loom and module also. and the clocks and the fuel tank etc... |
|
Deleted
Posts: 0
Reg: Apr 25, 2024 6:04:53 GMT
|
Post by Deleted on Aug 17, 2014 13:23:13 GMT
well as srad part,s are cheap and plenty . easy job too find and do smiley-shocked003
|
|
