|
Post by richardgs1000 on Sept 6, 2014 17:29:25 GMT
I need help
just done an engine swap on srad 600 carb model fires up well runs well for a few mins then floods its basically filing up the air box with fuel any suggestions, if you pull the pipe of the air box at the front there is fuel dribbling out of the pipe coming from the carbs I have pulled out all of the floats and given a clean but no difference
cheers
Richard
|
|
|
Post by bigkenx on Sept 7, 2014 5:56:32 GMT
Set a remote fuel line up leave air box off to see where fuel is coming from
|
|
|
Post by richardgs1000 on Sept 8, 2014 19:51:27 GMT
tried another set of carbs sorted the problem just need to work out what is wrong with the original ones but now the bike is up and running I have noticed the regulator is getting hot wiring on the bike has been well messed with, any ideas
|
|
|
Post by panda on Sept 11, 2014 14:59:39 GMT
i had the same problem with my 600 srad when i bought it, someone had fitted small block connectors joining the regulator to the main wires , because they were too small they were getting hot and melting, replaced with larger ones which have been fine ever since
|
|
|
Post by richardgs1000 on Sept 22, 2014 18:27:23 GMT
got to the bottom it was the rubbers in the carbs all cracked new rubbers sorted the problem if only all problems were this cheap to fix
|
|
|
Post by panda on Sept 22, 2014 18:34:36 GMT
good to hear you have it sorted fella
|
|
|
Post by bigkenx on Sept 22, 2014 18:55:22 GMT
Nice one
|
|