|
Post by beerbellykelly on Jan 11, 2015 13:19:33 GMT
|
|
|
Post by katana on Jan 11, 2015 15:17:32 GMT
She's definitely obviously gay..................and colour blind, but I volunteer to help her feel better about it through intense and rigorous sexual therapy!!!
|
|
|
Post by beerbellykelly on Jan 11, 2015 16:00:25 GMT
Shes got her hands full-
|
|
|
Post by homer711 on Jan 11, 2015 18:06:33 GMT
Nice tits... I mean the bike and I like the wheels too
|
|
|
Post by beerbellykelly on Jan 11, 2015 20:45:11 GMT
Yep boobies rule -
|
|
|
Post by beerbellykelly on Jan 11, 2015 20:49:21 GMT
Finally finnished the hybrid loom -katana gsxr & bandit hacked & atracked - ? heat shrunk solder kopex and multimeter means it should work for ling enough -as with stock katanas loom HAS TO BE FED IN from the middle forwards - this is because the GSXR fuse box is too fat to go under the mud frame top brace
|
|
|
Post by beerbellykelly on Jan 13, 2015 15:04:57 GMT
Its not the glorious wheelie ridden sun drenched freedom ride we crave , not all the time , and fuggitt - its raining so no riding no skateing just building , just as good. Measuring up for earlier front wheel- ( to allow mechanical speedo drive fir kat clocks ) amounts of machined parts to adapt early wheel to Later forks
|
|
|
Post by beerbellykelly on Jan 13, 2015 15:06:25 GMT
Boring bit Pretty bit
|
|
|
Post by captain chaos on Jan 13, 2015 16:29:11 GMT
Lads..... I have almost finnished my 24 x 8 x 4.75 quarter pipe .... Indoor this is what I play with in between fixing bikes (and I get paid for it as well)
|
|
|
Post by katana on Jan 13, 2015 19:44:06 GMT
|
|
|
Post by beerbellykelly on Jan 13, 2015 19:49:32 GMT
Skills ! I always end up falling off the table - Made a special wee tool Up to Measure these awkward dimentions - just got to find it !
|
|
|
Post by beerbellykelly on Jan 14, 2015 23:28:23 GMT
Adaptors started - Great excuse to make a tool holder from rough iron so I can bore the hole The shaper is one of my favourite tools - as hypnotic as boobys or wiggling hips -
|
|
|
Post by beerbellykelly on Jan 16, 2015 19:32:14 GMT
|
|
|
Post by beerbellykelly on Jan 19, 2015 22:52:03 GMT
Tonite I tested the air tank in the swing arm , the old old air tank - it failed at a mere 60 psi- so more welding and new mounting bosses look to be wise too- Attachments:
|
|
|
Post by beerbellykelly on Jan 19, 2015 22:53:14 GMT
Coming back together Attachments:
|
|