|
Post by beerbellykelly on Nov 10, 2014 21:06:48 GMT
Got an under tray delivered - after marvelling at the scratches all over it and deciding to use it anyway , I set about getting it fitted ( USD ) - an hour or so with the grinder hacksaw files and drill it fitted - then I set the saddle on and found fitting it used took all the space underside- so again out with the slitting disc and dave twigged it all better- Attachments:
|
|
|
STRAYKAT
Nov 10, 2014 21:12:55 GMT
via mobile
Post by gsx on Nov 10, 2014 21:12:55 GMT
Is that fitted upside down ??
|
|
|
Post by beerbellykelly on Nov 10, 2014 21:13:46 GMT
Says so above ( USD ) bike is very low under tray would have clashed with rear wheel -
|
|
|
Post by beerbellykelly on Nov 10, 2014 21:17:10 GMT
Handy wee tab fer number plate Attachments:
|
|
|
STRAYKAT
Nov 10, 2014 21:18:13 GMT
via mobile
Post by gsx on Nov 10, 2014 21:18:13 GMT
Lotto dosh to spend when it don't fit , got battery pushed forward behind panels on mine , just am option and unobtrusive
|
|
|
Post by beerbellykelly on Nov 10, 2014 21:19:02 GMT
Time to fit the APE or MRE billet tensioner - and check cam chain tension - Attachments:
|
|
|
Post by beerbellykelly on Nov 10, 2014 21:29:05 GMT
Yeh TB fair the bike is miles from stock , but a few of the ideas would not work on a stocker even - using a P clip to hold an under tray on - sucks - the slots were too small for the supplied Fastners -fitting to a stock bike bike would require removing three brackets - this is not stated - never mind it's modified. To suit but no room for battery - I have an anti gravity battery but the fairing is the only place left as the space where the battery sat is to be used for NOS solenoids fuel pump FPR random electrical shoite
|
|
|
STRAYKAT
Nov 10, 2014 21:39:20 GMT
via mobile
Post by gsx on Nov 10, 2014 21:39:20 GMT
Should be mental when it's done , think will make own under tray , hate being robbed for shit . Thought it would have mounted on rear fairing , seat bits . .
|
|
|
Post by beerbellykelly on Nov 11, 2014 1:01:44 GMT
Time is a factor here - im thought paying out would save time , but wish inhad made my own - fortunately i am Lucky to have a good mate who is an ace fabricator and turbo set up master bar none - but its a 3 hour round trip to his workshop and my ribs always hurt on the way home - FBM says this will boost hard , i have made my will
|
|
|
Post by beerbellykelly on Nov 11, 2014 17:35:37 GMT
New set up for draw through style NOS. On blow through -
|
|
|
Post by pedda on Nov 11, 2014 17:59:12 GMT
To suit but no room for battery - I have an anti gravity battery but the fairing is the only place left as the space where the battery sat is to be used for NOS solenoids fuel pump FPR random electrical shoite You know those LiFePo modular batteries? Small and handy - you can put one module here, another there, wire things up and presto... www.acewell.de/motorrad-batterien/lithium-ionen-motorrad-baterien/
|
|
|
Post by busaash on Nov 11, 2014 20:09:42 GMT
Cracking build thread pj , plenty fun ahead
|
|
|
Post by beerbellykelly on Nov 11, 2014 23:03:25 GMT
Heading together
|
|
|
Post by beerbellykelly on Nov 11, 2014 23:04:40 GMT
Tidy - really enjoyed seeing this come to be
|
|
|
Post by beerbellykelly on Nov 11, 2014 23:05:48 GMT
Flowey
|
|