|
Post by B2BC on Nov 21, 2014 19:25:14 GMT
|
|
|
Post by B2BC on Nov 21, 2014 19:25:52 GMT
fork legs and yokes will be powdercoated once my wavey discs and progressive springs turn up
|
|
|
Post by B2BC on Dec 3, 2014 16:12:06 GMT
right been away abit slowed down with the bike atm due to xmas and all the crap it brings and not to m,mention my bike fund going out the window lol. finished wiring in clocks just need to fit fuel tank and see if fuel gauge works. digital speedo sensor converter fitted and manual speedo drive/cable now working just wonder how far out of calibration it is.
|
|
|
Post by B2BC on Dec 3, 2014 16:13:58 GMT
the polished 6pots calipers were crap and left side has been shaved down to move out closer to forks so ive now changed them for a very good set of mk1 b12 calipers that i acquired for a very good price
|
|
|
Post by B2BC on Dec 3, 2014 16:16:34 GMT
because of change of front ends new steering stops needed to be made but i didnt want to weld to freshly powdercoated frame so i used the lower b12 engine mount nut things and fitted them under ignition where it bolts to top yoke
|
|
|
Post by B2BC on Dec 5, 2014 13:32:56 GMT
been having issues with clutch it very tough worked out it because the inside of the clutch case was sand blasted so very rough so the clutch pinion that slides into clutch case was stiff quick sand down clutch seems alot better but cable is also stiff so will be changing that aswell
|
|
|
Post by clivegto on Dec 6, 2014 20:43:04 GMT
Did this with my efe clutch arm welded a bit in middle of arm to make it a bit longer not as hard to pull lever in. Top one is longer than middle one which is standard.
|
|
|
Post by busaash on Dec 7, 2014 10:42:14 GMT
great idea clivegto thinking outside the box
|
|
|
Post by B2BC on Dec 8, 2014 11:25:47 GMT
good idea might try that if i can get another arm
|
|
|
Post by B2BC on Dec 10, 2014 11:15:16 GMT
made up a tax disc for the efe as the tube tax disc holder covers broken piece on tail light on the side
|
|
|
Post by B2BC on Dec 10, 2014 14:52:08 GMT
this is where tax disc is being mounted as behind it theres a nice inch crack and a piece missing but now you,ll never know it was there lol
|
|
|
Post by B2BC on Dec 13, 2014 15:08:02 GMT
led digital gear indicator and new battery arrived today
|
|
|
Post by B2BC on Dec 13, 2014 15:08:44 GMT
|
|
|
Post by captain chaos on Dec 13, 2014 16:57:07 GMT
theres a nice inch crack and a piece missing but now you,ll never know it was there lol we do know now
|
|
|
Post by B2BC on Dec 15, 2014 14:38:12 GMT
few parts arrived arrived of feebay but not what im waiting for
|
|