localguy
Velociraptor
Posts: 44
Reg: Aug 30, 2014 22:03:21 GMT
|
Post by localguy on Dec 2, 2014 3:57:06 GMT
Hey guys i have a 96 gsxr 1100 with a hydraulic clutch. I want to change the levers on the bike to aftermarket short units. what clutch lever would work for this? I tried a hayabusa lever but it didnt fit up. Any thoughts or suggestions?
|
|
Deleted
Posts: 0
Reg: Apr 25, 2024 7:21:35 GMT
|
Post by Deleted on Dec 2, 2014 14:40:28 GMT
i have fitted radial master cylinder,s with short lever,s............ and i hate the lever,s ? they are not as comfy and i have had trouble catching them with my glove,s..... so i am going back too long one,s?
|
|
localguy
Velociraptor
Posts: 44
Reg: Aug 30, 2014 22:03:21 GMT
|
Post by localguy on Dec 2, 2014 15:48:54 GMT
Really? I love the short ones, I put them on every bike I get because they're like $25 on eBay and look fantastic.. I would really like to figure out how to get this to work. The hayabusa lever is set up the right way, it's just too thick to fit into the perch, I can't grind it down because the part that hits the switch will be removed
|
|
|
Post by captain chaos on Dec 2, 2014 17:02:51 GMT
what do you need the clutch switch for? Just remove it and connect the wires.
|
|
localguy
Velociraptor
Posts: 44
Reg: Aug 30, 2014 22:03:21 GMT
|
Post by localguy on Dec 5, 2014 0:15:06 GMT
No im talking about just replacing the actual lever with one of these
|
|
|
Post by rusty on Dec 5, 2014 6:25:56 GMT
Really? I love the short ones, I put them on every bike I get because they're like $25 on eBay and look fantastic.. I would really like to figure out how to get this to work. The hayabusa lever is set up the right way, it's just too thick to fit into the perch, I can't grind it down because the part that hits the switch will be removed I've been looking at getting a set of these levers myself and funnily enough also have a clutch lever thats too fat to fit. from what I've been told, sv1000 levers will fit as will the tl1000
|
|
localguy
Velociraptor
Posts: 44
Reg: Aug 30, 2014 22:03:21 GMT
|
Post by localguy on Dec 5, 2014 17:31:15 GMT
i could probably mill this down a bit and tig a stopper on the end but that's a pain in the butt I would rather just buy one that works. I guess I'm gonna buy a set for the sv1000 and see if that works.
|
|
almostthere
Oviraptor
Posts: 19
Bikes: 92 gsxr 750wn
Reg: Oct 18, 2013 20:39:38 GMT
|
Post by almostthere on Dec 5, 2014 19:14:17 GMT
I've got a set of those levers they're a perfect fit for my 750wn so should be ok for an 1100
|
|
|
Post by rusty on Dec 5, 2014 19:17:53 GMT
I've got a set of those levers they're a perfect fit for my 750wn so should be ok for an 1100 does your wn have a cable clutch or hydraulic?
|
|
almostthere
Oviraptor
Posts: 19
Bikes: 92 gsxr 750wn
Reg: Oct 18, 2013 20:39:38 GMT
|
Post by almostthere on Dec 5, 2014 19:22:10 GMT
Forgot about the hydraulic clutch mines cable so maybe it won't fit
|
|
localguy
Velociraptor
Posts: 44
Reg: Aug 30, 2014 22:03:21 GMT
|
Post by localguy on Dec 5, 2014 21:15:02 GMT
I looked up the sv1000 levers, they don't seem to be compatible by the looks of them in the pictures.
|
|
|
Post by rusty on Dec 6, 2014 8:52:18 GMT
I looked up the sv1000 levers, they don't seem to be compatible by the looks of them in the pictures. thats odd as I was told they were the same fitment:-/ Might be worth checking the fitment of the original levers first
|
|
localguy
Velociraptor
Posts: 44
Reg: Aug 30, 2014 22:03:21 GMT
|
Post by localguy on Dec 6, 2014 16:05:07 GMT
Yea the original lever works fine lol, just have to figure out the lever with the same mounting and operating dimensions
|
|
|
Post by rusty on Dec 6, 2014 21:27:56 GMT
Yea the original lever works fine lol, just have to figure out the lever with the same mounting and operating dimensions lol I meant cross referencing standard lever fitments to see what matches
|
|
localguy
Velociraptor
Posts: 44
Reg: Aug 30, 2014 22:03:21 GMT
|
Post by localguy on Dec 7, 2014 15:27:49 GMT
Ya I've been trying to eyeball the style of lever that mounts in the perch... The hayabusa I really thought was going to work from my research... Now I'm lost lol
I didn't think there was any way to reference the dimensions of stock levers?
|
|