smudge46
Oviraptor
Posts: 4
Reg: Dec 2, 2014 21:04:55 GMT
|
Post by smudge46 on Dec 3, 2014 9:29:04 GMT
Anyone done this mod? I've got a set from a 650GSF. the resistance values are 1.2-1.9 whereas the stock coils are 2.4-3.2. What can I do to do this? I pressume I need a resistor somewhere so I'm not getting too much current through the CDI.Any ideas?
|
|
|
Post by danm54 on Dec 3, 2014 22:11:40 GMT
I used R1 coils. Wired them in series in the pairs of the original coils.
Been fine and the wet doesn't bother it at all.
|
|
|
Post by Kristjan on Dec 6, 2014 10:03:02 GMT
I bought K4 GSXR1000 stick coils for my 1100w motor, these measured ~1,8 ohm each. Wire them in series and it'll be fine.
|
|
smudge46
Oviraptor
Posts: 4
Reg: Dec 2, 2014 21:04:55 GMT
|
Post by smudge46 on Dec 7, 2014 16:35:33 GMT
Cheers Guys, appreciate the feedback.
|
|