|
Post by danm54 on Jun 2, 2013 19:16:26 GMT
I'm looking into fitting this on my turbo bike and for the life of me I cant think what its called to find out a little more about them!
There was a guy at Billing last year that had one fitted to his turbo drag bike to supply oil to the bearings and turbo before he started the bike.
Its a little (or not so little) expansion cylinder that taps into the oil gallery and fills with oil as the revs/oil pressure rise, when the revs/oil pressure drop the oil is then fed back under pressure to supply the turbo, in my case, while it spools down.
I don't plan to have a tap on it and keep it pressurised to get some oil flowing before I start the engine but if there is a small one made it could be useful to have just to feed the turbo while it spools down.
I just cant find what they're called!
Cheers
|
|
|
Post by nomex on Jun 2, 2013 19:38:37 GMT
|
|
|
Post by danm54 on Jun 2, 2013 20:07:26 GMT
That's the one mate!
They're quite pricey really, and bulky too.
|
|
|
Post by katana on Jun 2, 2013 20:45:34 GMT
And a waste of money! Your crank / rod / cam bearings manage quite well without assistance, the turbo has no 'special needs'!
|
|