gixxer7fifty
Oviraptor
Posts: 3 
Bikes: 90 cbr 600 f1, 92 cbr 600 f2, 93 GSX-R 750 current
|
Post by gixxer7fifty on Apr 2, 2015 16:44:15 GMT
Got a new engine for my 93 gsxr 750 and now it wont start. Wants to but wont. Plugs are good its getting gas and from what i checked all the wires are good. Brand new battery. Just cant get it. And im starting to pull my hair. Any help or suggestions would be greatly appreciated
|
|
|
|
Post by fatblokeonbandit on Apr 2, 2015 17:25:57 GMT
coils, ? plug leads? 1+4. 2+3,.....  this is air cooled might be better in oilly cooled..... |
|
|
|
Post by captain chaos on Apr 2, 2015 18:26:34 GMT
coils, ? plug leads? 1+4. 2+3,..... this is air cooled might be better in water cooled..... fixed |
|
gixxer7fifty
Oviraptor
Posts: 3
Bikes: 90 cbr 600 f1, 92 cbr 600 f2, 93 GSX-R 750 current
|
Post by gixxer7fifty on Apr 11, 2015 22:00:57 GMT
thanks for moving, been busy and had to reset my password. but I have them in order form 1-4 2-3 but the kid I bought it from had em all over. so from the back coil pact and the front coil pack which ones are 1-4 2-3?
|
|
|
|
Post by captain chaos on Apr 12, 2015 6:46:00 GMT
front coil 2+3, rear coil 1+4
|
|
gixxer7fifty
Oviraptor
Posts: 3
Bikes: 90 cbr 600 f1, 92 cbr 600 f2, 93 GSX-R 750 current
|
Post by gixxer7fifty on Apr 14, 2015 19:56:05 GMT
thank you. I got it running yesterday and took er for a spin around the block today, but coming around the last corner she stalled. its my fuel petcock, when I cleaned the tank a few months ago I cleaned the fuel cock too and now its not flowing likr it should. gas gets to the bowls but only on prime... and now wont start unless it gets a shot of starting fluid... any ideas I don't wanna put anymore money into this thing. haven't so far except for the enging and now the flow is the only problem...
|
|
|
|
Post by kokolis on Apr 18, 2015 6:05:21 GMT
Probably, vacum tap problem.
You can test it, take the hose end from the carbs and suck trough, if gas comes out is ok, if not new /ovehaul tap needed.
|
|
