|
|
Post by busaash on Jun 10, 2013 17:22:28 GMT
gsxr 1000 engine in custom frame, bringing me closer to edge  looking for help with sorting out fitment of an external fuel pump as I have a hayabusa external fuel pump . tank is a one off that does not have a fuel pump in. |
|
Teresa O.
Velociraptor
Posts: 37 
Bikes: Trickframed 1127, Turbo 14 and many more
|
Post by Teresa O. on Jun 14, 2013 7:49:26 GMT
you can either hook up the standard Busa ext. Pump or just fit any suitable pump and FPR... If its non adjustable you might need a powercommander to adjust fueling... If it is adjustable you might want an AFR-sensor to sort out optimum pressure... With the DIY-Setup you have more freedom to chose where to put all the stuff seperately(as HAya pump is pretty bulky)and you can decide whether you want to go dead-end setup or inline through the fuel rail (reccomended).
cheers..!
|
|
|
|
Post by busaash on Jun 14, 2013 11:40:06 GMT
you can either hook up the standard Busa ext. Pump or just fit any suitable pump and FPR... If its non adjustable you might need a powercommander to adjust fueling... If it is adjustable you might want an AFR-sensor to sort out optimum pressure... With the DIY-Setup you have more freedom to chose where to put all the stuff seperately(as HAya pump is pretty bulky)and you can decide whether you want to go dead-end setup or inline through the fuel rail (reccomended). cheers..! many thanks , still looking at my options |
|
