deano87
Oviraptor
Posts: 9
Bikes: Mk1 bandit 1200, aprilia rs125
Reg: Sept 25, 2014 10:49:52 GMT
|
Post by deano87 on Oct 6, 2014 16:42:58 GMT
Thank you. Now to start sourcing parts. With the blade yokes how much is the step it looks about 10mm from the pic and does the b12 stream press in or is extra maching required?
|
|
|
Post by fatblokeonbandit on Oct 6, 2014 17:05:03 GMT
whats the fork centres on the fireblade YOKES??
|
|
|
Post by bigdazbandit on Oct 6, 2014 17:53:13 GMT
My steering lock works perfect on mine
|
|
|
Post by fatblokeonbandit on Oct 6, 2014 18:05:54 GMT
My steering lock works perfect on mine L/M forks on a mark 1 and the pin is miles away from the hole in the frame
I think I've had 11 mark 1's and I've done the slingy usd's on 8 of them and none have lined up. you must be very lucky
|
|
|
Post by bigdazbandit on Oct 6, 2014 19:15:23 GMT
Looking at you pic your right and after speaking to my mechanic who helped me it doesn't I genuinely thought it did lol is there no way of making it work I've got a custom made yoke gonna have a nosey tomorrow and see if it can
|
|
Philo Beddoe
Oviraptor
Posts: 10
Bikes: 1200 Bandit, DR800, GSX750 Hardtailed chop.
Reg: Jun 13, 2014 11:42:50 GMT
|
Post by Philo Beddoe on Oct 9, 2014 12:33:21 GMT
here's my stepped yoke for a MK1 bandit (if the picture has loaded?).....
|
|
|
Post by busaash on Oct 9, 2014 13:16:43 GMT
very nice top yoke you have mate
|
|
|
Post by bigdazbandit on Oct 9, 2014 13:55:16 GMT
Very nice indeed
|
|
Deleted
Posts: 0
Reg: May 5, 2024 8:10:17 GMT
|
Post by Deleted on Oct 9, 2014 15:20:01 GMT
o yes i like that who made that if you dont mind telling us .........
|
|
|
Post by bigdazbandit on Oct 9, 2014 19:22:13 GMT
Do tell and maybe a price
|
|
Philo Beddoe
Oviraptor
Posts: 10
Bikes: 1200 Bandit, DR800, GSX750 Hardtailed chop.
Reg: Jun 13, 2014 11:42:50 GMT
|
Post by Philo Beddoe on Oct 10, 2014 12:28:40 GMT
I had it made by one of my suppliers, he owed me a favour in helping him get his business off the ground & wanted to test out his new 5 axis CNC machine. Quite a few hours went into it, so the cost would be prohibitive. I'm afraid I can't tell you who made it. Here's the underside of it, hope you like it...
|
|
|
Post by bigdazbandit on Oct 15, 2014 21:29:37 GMT
I had it made by one of my suppliers, he owed me a favour in helping him get his business off the ground & wanted to test out his new 5 axis CNC machine. Quite a few hours went into it, so the cost would be prohibitive. I'm afraid I can't tell you who made it. Here's the underside of it, hope you like it... What's the step on that
|
|
Philo Beddoe
Oviraptor
Posts: 10
Bikes: 1200 Bandit, DR800, GSX750 Hardtailed chop.
Reg: Jun 13, 2014 11:42:50 GMT
|
Post by Philo Beddoe on Oct 16, 2014 12:35:50 GMT
25mm. I used some 1994 GSXR 750 USD forks & they're about 25mm shorter than the Bandit ones. I'm sure using a flat yoke would've been fine but a stepped one just looks nicer/different in my opinion, plus I had the resources to get it done for nowt - rude not to!
|
|
|
Post by bigdazbandit on Oct 16, 2014 13:03:28 GMT
Definately I'm going too need one as its too low for me I prefer the natural riding position of the bandit its pushinge too lean forward and it doesn't suit me
|
|