leenhead
Velociraptor
Posts: 29
Reg: Apr 18, 2013 21:17:07 GMT
|
Post by leenhead on Apr 20, 2013 19:57:11 GMT
Just seen a braced wp arm on ebay link, will it fit to a mk1 bandit without to much hassle.
|
|
|
Post by katanamangler on Apr 20, 2013 20:06:14 GMT
Cant answer your question but you might have better luck in the oil-cooled section.
|
|
gixergeek
Velociraptor
Posts: 33
Reg: Apr 18, 2013 16:06:10 GMT
|
Post by gixergeek on Apr 20, 2013 22:35:33 GMT
Its 231mm across the pivot if that helps...
|
|
leenhead
Velociraptor
Posts: 29
Reg: Apr 18, 2013 21:17:07 GMT
|
Post by leenhead on Apr 21, 2013 17:40:51 GMT
Yep was gonna put it there but hit wrong button and ta for info.
|
|
|
Post by nitro on May 2, 2013 13:51:03 GMT
Yes, made this last winter (look projects). Milled a bit 2-3mm from both ends of the swingarm and put the bearing from bandit (sealed!) in. The wheel I set a few mm to the right. Swing arm to the right is shit, because of the brake pump. Linkage of B12 and dog bone from 1074 (made new one - a little bit shorter). Took shock of 1127 (better 1074 one).
|
|