|
|
Post by homer711 on Aug 3, 2013 7:59:20 GMT
Does anyone have Efe with 40mm gsxr carbs?I need some advice what size the main jet should be. Dont want to buy all sizes between 100 and 170  Bike is stock efe with v&h sidewinder, 40mm gsxr carbs with k&n twin filters. I just need basic setup so the bike could run safely. Later on I have time to do proper tuning...
|
|
cam
Oviraptor
Posts: 8 
|
Post by cam on Aug 4, 2013 18:40:09 GMT
I would have thought 40mm carbs were to big for a standard efe 36mm is plenty my 1230 had 36mm and kicked out 130 at the rear wheel
|
|
|
|
Post by homer711 on Aug 4, 2013 18:51:35 GMT
I know that 40mm is too big for stock engine. This is only temporary solution...
|
|
|
|
Post by dago on Aug 5, 2013 1:26:11 GMT
i had 38mm on mine and ran 145 mains
|
|
|
|
Post by homer711 on Aug 11, 2013 10:34:07 GMT
Thank you. Will try something between 140 and 150   |
|
bowler
Velociraptor
Posts: 34
|
Post by bowler on Aug 14, 2013 10:16:51 GMT
Thank you. Will try something between 140 and 150 Nice bike! Question, where did you get the oil return that's screwed into the oil filler cap?  |
|
|
|
Post by homer711 on Aug 16, 2013 17:15:00 GMT
It is a crankcase breather. It goes to swingarm where is the catchtank.
|
|
bowler
Velociraptor
Posts: 34
|
Post by bowler on Aug 16, 2013 19:27:16 GMT
It is a crankcase breather. It goes to swingarm where is the catchtank. I know, but I don't know where I can buy such a thing |
|
|
|
Post by homer711 on Aug 17, 2013 9:14:09 GMT
Sorry (rofl)English is not my native language.
Ebay and shop was torques_uk if I remember right.
|
|
|
|
Post by Pete750ET on Aug 19, 2013 13:20:10 GMT
YoshiJohnny who used to be on the Old Site, but doesn't appear to be on here, used to make and sell these, got one on my bike.
He is on the Facebook page under John Oliver, you could send him a PM still if he still has any?
|
|
