|
Post by jonny on Aug 26, 2013 12:01:54 GMT
Does anyone know if there is there a 4-pot caliper that would simply bolt on to replace the standard, floating 2-pot caliper?
Cheers.
Jonny
|
|
|
Post by jonny on Sept 3, 2013 22:46:53 GMT
No-one?
|
|
peterrr
Velociraptor
katana!
Posts: 39
Bikes: GSX750S3, GSXR1100M, GSX1100SZ (project)
Reg: Apr 22, 2013 16:22:00 GMT
|
Post by peterrr on Sept 4, 2013 15:55:13 GMT
Don't know but you can allways swap the front end with an usd from a GSXR750, then you have 2 discs.
|
|
|
Post by jonny on Sept 6, 2013 16:33:47 GMT
Bit of overkill for a commuter hack.
|
|
samtait87
Velociraptor
Posts: 25
Reg: Jun 1, 2013 7:43:38 GMT
|
Post by samtait87 on Sept 10, 2013 20:53:07 GMT
have you got braided hose yet that makes a little difference
i know the early ones have a different make calliper to later ones but are interchangeable the kwak ER5 callipers supposedly also fit.... no idea if any have an advantage over others
|
|
|
Post by jonny on Sept 11, 2013 13:46:38 GMT
have you got braided hose yet that makes a little difference i know the early ones have a different make calliper to later ones but are interchangeable the kwak ER5 callipers supposedly also fit.... no idea if any have an advantage over others Thanks, mate. i have the braided hose and mine is an '03 so it is the later caliper. I just hate the 2-pot-on-the-same-side calipers. There is always more travel on the lever than seems necessary (+plus it's f*****d!) J.
|
|