birdman
Oviraptor
Posts: 2 
|
Post by birdman on Aug 28, 2013 9:22:54 GMT
Hi, looking for some help. I need a new exhaust system for my gsx 750 katana popup, is there any other fitments would match as I can not find any listed. Many thanks.
|
|
popkat
Velociraptor
Posts: 21
|
Post by popkat on Aug 31, 2013 10:15:25 GMT
Motad Neta exhaust for a gsx750ES/EF, same engine you have to make a small dent just below the rear brake pedal for clearance, easy to do neatly. Marving list systems for the ES/EF too so they should fit with just slight mods, not tried one though. Have a look on Katanaownersclub.co.uk they are in the process of tryng to get a replica system built, may take some time though
|
|
peterrr
Velociraptor
katana!
Posts: 39
Bikes: GSX750S3, GSXR1100M, GSX1100SZ (project)
|
Post by peterrr on Aug 31, 2013 11:10:04 GMT
downpipes from the GSXR750/1100 oilcoolers also fit perfectly
I've got a 4 in 1 from an 1100R on my popup
|
|
birdman
Oviraptor
Posts: 2
|
Post by birdman on Aug 31, 2013 22:19:47 GMT
Thanks a lot for info, i'll have a look into the systems.
|
|
popkat
Velociraptor
Posts: 21
|
Post by popkat on Oct 10, 2013 13:46:12 GMT
downpipes from the GSXR750/1100 oilcoolers also fit perfectly I've got a 4 in 1 from an 1100R on my popup Peterr have you got pictures of your popup with the GSXR1100 pipes fitted ?. I've just got an ES and will be looking for a performance 4-1 exhaust, will be putting rearsets on so not worried about it lining up at the back but I do want the down pipes to be nice and tucked in for ground clearance. Cheers |
|
peterrr
Velociraptor
katana!
Posts: 39
Bikes: GSX750S3, GSXR1100M, GSX1100SZ (project)
|
Post by peterrr on Oct 17, 2013 15:40:30 GMT
  Here it is, don't have any other pics because my hard drive crashed an I am out of the country at the moment. I've lowerd the front end about 80mm with the front fork of a GSXR750W and it has never hit the street so I guess the clearance is enough for me. Will fit a new exhaust when I have the oilcooler engine in her.. but for now it works perfect. |
|
popkat
Velociraptor
Posts: 21
|
Post by popkat on Oct 17, 2013 20:38:58 GMT
That looks really good, was it a straight fit or did you have to mod the headers at all ?. Have you tried 750 headers ? I would guess they are shorter, would they hit the sump ?, trying to widen the search, the more options the more chance I've got of finding one to fit. Cheers. *When are you fitting the oil cooled engine, i'd like that Yoshi on mine  |
|
bracket
Velociraptor
Posts: 26
Bikes: GSX 750 ES
|
Post by bracket on Oct 27, 2013 19:29:29 GMT
The marving stuff fits nicely sounds good too. Got one on my 750es so pretty much same as popup kat. Only issue I had was centre stand catching exhaust but thats easily sorted.
|
|
overbomber
Oviraptor
Posts: 6
|
Post by overbomber on Oct 30, 2013 9:11:12 GMT
|
|
