|
Post by gs1000simon on Aug 30, 2013 18:09:15 GMT
Very quick question does a katana swingarm (ali) go straight into an 750 et and is anything else needed eg spacers. Im sure its running gs1000 rear wheel. Cheers in advance
|
|
|
Post by atshed on Sept 17, 2013 22:27:26 GMT
am just fitting an 1100 ali arm to my 750et . apart from widening holes to 16mm on bike frame - pretty straight forward.( the 750 spindle is smaller diameter) Also beware the shorter spindle - i think the katanas had shorter spindles. ie you will need the 1100et longer one.
|
|
|
Post by katman1168 on Sept 20, 2013 17:55:03 GMT
if you use the bearing spacers from the 750 swingarm there is no need to alter frame and can use your 750 spindle
|
|
gsxmot0martin
Oviraptor
Posts: 15
Bikes: gsx1170 moto martin, r1,rd400,ducati 750 ss, 1999 busa
Reg: Jul 10, 2013 22:43:59 GMT
|
Post by gsxmot0martin on Oct 13, 2013 21:32:24 GMT
Hi Katman we tried that and the bearing spacers/bushes were to small on the bearings so will need to get new ones machined up to suit ,but thanks anyway for the advice.
|
|