gixergeek
Velociraptor
Posts: 33 
|
Post by gixergeek on Sept 27, 2013 9:09:07 GMT
Hi all.
My gs project chop is coming together, its got electronic ignition and stock looking coils that are cracked and split.
So will gsxr1100 w/c coils do the job? Any one know?
Cheers
|
|
|
|
Post by katana on Sept 27, 2013 17:53:17 GMT
Depends on the primary resistance! Measure your stockers - they'll usually be between 3-5 ohms.
Any replacement should be in that range. Don't be tempted to go with less as it'll draw more current
and that could fry the transistors in the ign. module
|
|
gixergeek
Velociraptor
Posts: 33
|
Post by gixergeek on Oct 2, 2013 18:46:27 GMT
Thanks Katana. Just gotta trawl round and see what the originals were now.lol.
|
|
|
|
Post by slim on Oct 2, 2013 23:02:34 GMT
From memory stock GS 2 to 3 ohms & bandit etc 3 to 5 ohms
|
|
|
|
Post by hussey1 on Oct 5, 2013 8:33:07 GMT
I have some 3ohm dyna coils in the for sale section!
|
|
78gs1100
Oviraptor
Posts: 1
|
Post by 78gs1100 on Oct 5, 2013 19:34:40 GMT
Dyna 3ohm is what you want.
|
|
