|
|
Post by clivegto on Oct 14, 2013 17:37:59 GMT
Not that much of a project really at the moment. Bought this of a good friend of mine with a knackered motor so it has been stood for 2 years before I got it. Plan is just to put it back on the road at the moment then a big bore motor.  |
|
|
|
Post by clivegto on Oct 14, 2013 18:27:27 GMT
Sourced another motor needs clutch sorting out and there is some slight damage to the bottom crank case but it turns over ok.  |
|
|
|
Post by clivegto on Oct 14, 2013 18:32:56 GMT
Putting motor in on my own this evening.  |
|
|
|
Post by clivegto on Oct 14, 2013 18:38:46 GMT
Motor in only trapped one finger a little bit was not to bad to get in on my own.  |
|
|
|
Post by clivegto on Oct 14, 2013 18:42:33 GMT
The bit of damage to the crankcase, will repair this with JB weld.  |
|
|
|
Post by clivegto on Oct 21, 2013 19:13:59 GMT
Exhaust down pipes were a bit grubby.  |
|
|
|
Post by clivegto on Oct 21, 2013 19:20:21 GMT
Cleaned it up and painted it.  |
|
|
|
Post by clivegto on Oct 21, 2013 19:21:35 GMT
Fitted.  |
|
gsxrsam
Velociraptor
Posts: 46 
|
Post by gsxrsam on Oct 23, 2013 20:41:57 GMT
looks a lot better now its out from under sheet mate..
|
|
|
|
Post by clivegto on Oct 30, 2013 22:14:52 GMT
 Fixed the crank case with JB weld. |
|
|
|
Post by clivegto on Oct 30, 2013 22:20:18 GMT
Made some brackets for the coils.  |
|
|
|
Post by clivegto on Oct 30, 2013 22:37:17 GMT
Had 2 clutches in bits with 1 good outer clutch basket & 2 bad iner baskets, so took 1 out of my ET 1100 and now clutch is all back together after a bit of head scratching. Have ordered a motobatt battery fitted oil filter & got some oil. Have sorted wiring loom out to get it to run it was a bit of a mess.
|
|
|
|
Post by imago on Oct 31, 2013 8:34:27 GMT
It's coming together now then. Sorting out messy wiring can be a pain "I'll just tidy this up." frequently turns into a weeks work.
|
|
|
|
Post by clivegto on Nov 4, 2013 19:18:48 GMT
When my old friend had the bike his girl frend hit the bike with a hammer, least it was not the tank.  |
|
|
|
Post by clivegto on Nov 4, 2013 19:26:52 GMT
Straightened grab rail, looks ok to me.  |
|
