600 bandit rear wheel into gsx1100ef

[suzuki11e]

Hello, im trying to fit a bandit 600 rear wheel into my gsx1100ef using its standard swingarm and chain and sprockets. ive changed the rear disc and got a caliper and caliper carrier to suit.
After offering the wheel into the swingarm the just isnt the room for the caliper carrier to fit, (by a long way).
My question is where am i going wrong, do i need to down size the chain to a 520 or is there another swingarm that will fit in without any frame mods, i have a lathe if top hat spacers were to be needed.
Any advice and or pics would really be apriciated.
Thanks

[kokolis]

You can use a 530 chain and sprockets, you have to put the wheel with the sprocket carrier and spacer in the swingarm and then match-make spacers for the disc and caliper carrier,

[captain chaos]

all the info is in the info section on here.

[suzuki11e]

Thanks chaps

[suzuki11e]

I might be a bit daft but i cant find anything about it in the info section. Any help??

[captain chaos]

Oct 17, 2013 10:56:12 GMT suzuki11e said:

I might be a bit daft but i cant find anything about it in the info section. Any help??

don't know if you're daft or not, but you seem to be right about the info not being there.

I know it's somewhere. I'll have a look.

[captain chaos]

Found this:

www.aircooledsuzuki.co.uk/viewtopic.php?f=9&t=301

i thought it was already on OSS as well but apparently not yet. It's about GSX-R wheels but B6 should be the same.

[suzuki11e]

Hey thanks, youre a star.

[suzuki11e]

The wheels in, just need to get a caliper carrier made as the one i adapted looks to weak.
Thanks all