jimbo
Oviraptor
Posts: 19
Reg: Dec 25, 2013 7:38:52 GMT
|
Post by jimbo on Mar 26, 2014 12:50:20 GMT
Hi All In the process of digging out the old photo's I had on the other site, but thought it time I started a thread off again. This is as it was about 18months ago ... rather a lot changed again since then ... lots more to follow:
|
|
jimbo
Oviraptor
Posts: 19
Reg: Dec 25, 2013 7:38:52 GMT
|
Post by jimbo on Mar 26, 2014 12:57:59 GMT
|
|
jimbo
Oviraptor
Posts: 19
Reg: Dec 25, 2013 7:38:52 GMT
|
Post by jimbo on Mar 26, 2014 13:03:58 GMT
Mocking Turbo Setup ... (Planning stage)
|
|
jimbo
Oviraptor
Posts: 19
Reg: Dec 25, 2013 7:38:52 GMT
|
Post by jimbo on Mar 26, 2014 13:09:50 GMT
Early 2013 - time to get serious, full strip down to build the motor to Turbo Spec, Busa Pistons, Rods, HD Studs, new shells, Gearbox etc Then attention to the Frame ... I wanted a full lockup clutch in here, but as this rail runs accross the clutch cover with about 2mm clearence, decided to have the frame modified. Off to Norfolkshire to find Stu at WSR From this:
|
|
drzsimon
Tyrannosaurus Rex
Posts: 70
Bikes: GSXR 7/1216 turbo, Buell 1125, Buell XB9, Buell XB12, Yamaha Slider 70cc
Reg: Jun 15, 2013 19:13:15 GMT
|
Post by drzsimon on Mar 26, 2014 15:15:55 GMT
Looking forward to this :-)
|
|
jimbo
Oviraptor
Posts: 19
Reg: Dec 25, 2013 7:38:52 GMT
|
Post by jimbo on Mar 27, 2014 17:31:36 GMT
|
|
jimbo
Oviraptor
Posts: 19
Reg: Dec 25, 2013 7:38:52 GMT
|
Post by jimbo on Mar 27, 2014 17:33:13 GMT
To 99.9% of the population, no one would ever know ... Fresh back from the powder coaters
|
|
jimbo
Oviraptor
Posts: 19
Reg: Dec 25, 2013 7:38:52 GMT
|
Post by jimbo on Mar 27, 2014 17:37:11 GMT
Building the motor
|
|
jimbo
Oviraptor
Posts: 19
Reg: Dec 25, 2013 7:38:52 GMT
|
Post by jimbo on Mar 27, 2014 17:38:05 GMT
Stretching the Mag4 Swing Arm
|
|
jimbo
Oviraptor
Posts: 19
Reg: Dec 25, 2013 7:38:52 GMT
|
Post by jimbo on Mar 27, 2014 17:39:32 GMT
Just a quick pic - some of you may remember it in its previous life ...
|
|
jimbo
Oviraptor
Posts: 19
Reg: Dec 25, 2013 7:38:52 GMT
|
Post by jimbo on Mar 27, 2014 17:45:46 GMT
|
|
jimbo
Oviraptor
Posts: 19
Reg: Dec 25, 2013 7:38:52 GMT
|
Post by jimbo on Mar 27, 2014 17:47:30 GMT
|
|
jimbo
Oviraptor
Posts: 19
Reg: Dec 25, 2013 7:38:52 GMT
|
Post by jimbo on Mar 27, 2014 17:48:32 GMT
|
|
|
Post by busaash on Mar 27, 2014 17:52:36 GMT
well done jimbo looks the bollocks
|
|
|
Post by gray7/11 on Mar 27, 2014 19:03:16 GMT
Nice work Jimbo & contributors.
Never get bored of seeing your bike...
|
|