|
Post by panda on Sept 13, 2014 7:42:33 GMT
anymore updates fella, u got any more done to the old girl ?
|
|
|
Post by fatblokeonbandit on Sept 16, 2014 13:25:13 GMT
anymore updates fella, u got any more done to the old girl ? Not much shipmate, since me old dad had a stroke Ive got no time hardly.. BUT I've cobbled together a oil catch tank for the breathers to go to, just need the filter, and sorted out the rear brake, then found a banjo bolt break light switch that was on my Harris, will save messing with switches, or so I thought, wrong bleedin' thread isn't it,, Typical
anyway it will d be done soonish I hope...
|
|
|
Post by panda on Sept 16, 2014 15:16:32 GMT
sorry to hear about your dad fella, puts other things into perspective , that bike is going to look cool when finished gary
|
|
|
Post by fatblokeonbandit on Sept 16, 2014 17:59:15 GMT
sorry to hear about your dad fella, puts other things into perspective , that bike is going to look cool when finished gary wise words matey wise words.... all I need to find now are a working rear calliper and a decent set of carbs!!!!!!!!!!!!!!!!
then a couple of days to fit all the bodywork................
|
|
|
Post by rusty on Sept 16, 2014 18:17:29 GMT
Sorry to hear about your dad:-( Bike is looking great so far...btw what thread banjo bls do you need as I have a spare sitting in my garage somewhere
|
|
|
Post by fatblokeonbandit on Sept 16, 2014 18:30:23 GMT
Sorry to hear about your dad:-( Bike is looking great so far...btw what thread banjo bls do you need as I have a spare sitting in my garage somewhere Its the 10x1mm but ive just bought a new switch from e*ay cheers matey. Came very close to sticking the whole lot on there as an unfinished project this afternoon, as I had to move these 2 out of the way to get to it to do some work, and had a realisation that I could have been out having a good thrash round instead!!!!!!!!!!!!!!
must finish it now to get the best price when I flog it...
|
|
|
Post by rusty on Sept 16, 2014 19:20:36 GMT
No worries:-)
|
|
Deleted
Posts: 0
Reg: May 5, 2024 11:57:00 GMT
|
Post by Deleted on Sept 16, 2014 20:19:14 GMT
gary i have sum carb,s they was on a 1127 donkey but i think they are 750 j/k .... with a large nut in the float bowel . and i can give you a rear caliper but it,s been in a box/shelf 5yrs ....... and i am allway,s looking for another project ha ha
|
|
|
Post by fatblokeonbandit on Sept 16, 2014 21:09:33 GMT
gary i have sum carb,s they was on a 1127 donkey but i think they are 750 j/k .... with a large nut in the float bowel . and i can give you a rear caliper but it,s been in a box/shelf 5yrs ....... and i am allway,s looking for another project ha ha Thanks for the offer but I've found a decent set of b12 carbs and I've got 2 knackered rear callipers, and I reckon I can make one out of them, if not I might take you up on that
|
|
|
Post by davo231481 on Sept 17, 2014 11:51:20 GMT
Great build. Stick with the black wheels. Black is the new black.
|
|
|
Post by captain chaos on Sept 17, 2014 13:05:47 GMT
don't listen to him. White wheels.
|
|
Deleted
Posts: 0
Reg: May 5, 2024 11:57:00 GMT
|
Post by Deleted on Sept 17, 2014 13:52:21 GMT
i like red wheel,s smiley-shocked029
|
|
|
Post by fatblokeonbandit on Sept 17, 2014 14:49:22 GMT
don't listen to him. White wheels. If I was keeping it then white would be compulsory, But as im going to have to flog it its a bit academic as the new owner will probably change the colour anyway???
Or I might keep the engine and sell the rolling chassis, after mot'ing it of course??
who knows, I used to be indecisive but now i'm not sure..??
|
|
|
Post by captain chaos on Sept 17, 2014 15:30:46 GMT
paint the wheels white and then sell it without the wheels
|
|
|
Post by fatblokeonbandit on Sept 17, 2014 15:34:59 GMT
paint the wheels white and then sell it without the wheels I have a spare set that I was considering doing exactly that too... great minds think alike
|
|