cj
Velociraptor
Posts: 27
Reg: May 14, 2014 12:58:57 GMT
|
Post by cj on May 19, 2014 8:05:58 GMT
Ok bought a gsxr750ws in 2011 as a hack was a tidy bike never let me down I fitted twin spots and renthals but that's it as it was a daily runaround after about 6 months I stripped it to a bare frame and sold all the bits except for the frame...after seeing the martek gsxr were they changed everything as a company project to show you could do some pretty radical things with the original frame through engineering....I decided I loved the look on the frame tank Ect and the only thing letting it down was the lack of an oil cooled motor ,,,so knowing I wanted to fit an aprilia rsv swingarm I machined the boss in the frame to take the wider arm I also got 2 stainless spacers made a top hat and the threaded. Swingarm adjuster ,,I cut of the lower frame rails and machined of the lower shock linkage mounting from the frame all these will be custom cnc machined to suit so there you go this is the start of my project its going to be a slow burner as need to source all the parts except for the frame if you have anything drop me a pm thanks ..cj
|
|
|
Post by strangewayz on May 19, 2014 15:27:50 GMT
A Cider Joe GSXR project Sounds cool, good luck collecting all the parts, look forward to seeing the pics as it starts to take shape.
|
|
cj
Velociraptor
Posts: 27
Reg: May 14, 2014 12:58:57 GMT
|
Post by cj on May 19, 2014 16:14:35 GMT
Will be a long term project Alan I have a interesting non zook project ime keen to get finished so I can devote my full attention to the gixer
|
|