|
Post by jonboy on Jan 5, 2015 6:16:32 GMT
I am just pulling down my 1170ET motor and have a couple of questions,
Do EFE base gaskets fit ET engines and also i seem to remeber that the EFE had shims behind the clutch basket in different thickness' to take out axial play on clutch basket, if that is right do they fit in an ET lump?
Other than that it all going well with no other issues yet....
Jonboy
|
|
|
Post by arnout on Jan 5, 2015 16:20:14 GMT
Do EFE base gaskets fit ET engines.. Yup.. Very nice gaskets they are too.. Fit dry.. ..and also i seem to remeber that the EFE had shims behind the clutch basket in different thickness' to take out axial play on clutch basket, if that is right do they fit in an ET lump? Yup, the EFE has the extra shim.. But you'd need the big lumpy spacer (around which the clutch assembly rotates) from the EFE as well as that is 1 mm narrower to accommodate the shim.. Alternatively you could machine the ET spacer down 1mm, but as it is a hardened piece that might be quite tough going on a regular lathe..
|
|
|
Post by jonboy on Jan 6, 2015 6:05:09 GMT
Thanks Arnout
|
|