|
Post by arnout on Jan 15, 2015 16:53:46 GMT
Another option is if you have gsxr1100k top and bottom yokes then the standard top yoke can easily be drilled to take standard Bandit 1200 handlebar mounts, I have done this on my gsx750 project Yup.. This is what I did on my EFE with GSX-R usd forks, but I used Yamaha early TDM or XV535 clamps.. These are angled back placing the handlebar a bit closer to the rider.. I added 15mm spacers under the clamps to lift them some more and provide room the protruding fork legs..
|
|
anatak
Oviraptor
Posts: 12
Bikes: Katana 1100 SV 1000
Reg: Jan 12, 2015 7:37:27 GMT
|
Post by anatak on Jan 15, 2015 23:05:54 GMT
Thanks i was thinking about doing that but was not sure if it was ok but now i see it works i will try that thanks again
|
|
quexpress
Velociraptor
Posts: 39
Bikes: 2 X 1980 GSX1100ET, 1985 GV1200, 2000 Valkyrie
Reg: May 21, 2013 0:12:58 GMT
|
Post by quexpress on Jan 17, 2015 15:08:54 GMT
Another option is if you have gsxr1100k top and bottom yokes then the standard top yoke can easily be drilled to take standard Bandit 1200 handlebar mounts, I have done this on my gsx750 project Yup.. This is what I did on my EFE with GSX-R usd forks, but I used Yamaha early TDM or XV535 clamps.. These are angled back placing the handlebar a bit closer to the rider.. I added 15mm spacers under the clamps to lift them some more and provide room the protruding fork legs.. They look great! Are these 7/8-inch handlebars?
|
|
|
Post by arnout on Jan 17, 2015 18:12:34 GMT
They look great! Are these 7/8-inch handlebars? Yup.. 22.2mm cheapo flat (drag) bars..
|
|
quexpress
Velociraptor
Posts: 39
Bikes: 2 X 1980 GSX1100ET, 1985 GV1200, 2000 Valkyrie
Reg: May 21, 2013 0:12:58 GMT
|
Post by quexpress on Jan 18, 2015 1:20:26 GMT
They look great! Are these 7/8-inch handlebars? Yup.. 22.2mm cheapo flat (drag) bars.. I was thinking of the risers. Thanks!
|
|
anatak
Oviraptor
Posts: 12
Bikes: Katana 1100 SV 1000
Reg: Jan 12, 2015 7:37:27 GMT
|
Post by anatak on Feb 14, 2015 7:58:37 GMT
This is the way i went think i will be able to ride the old girl now just need some longer cables and brake line
|
|
|
Post by gsx on Feb 14, 2015 8:48:37 GMT
This is the way i went think i will be able to ride the old girl now just need some longer cables and brake line Didn't on mine with 11 usd forks , just spent some time re routing . . . Free!
|
|
anatak
Oviraptor
Posts: 12
Bikes: Katana 1100 SV 1000
Reg: Jan 12, 2015 7:37:27 GMT
|
Post by anatak on Feb 14, 2015 13:24:57 GMT
Will take tank of tomorrow see what i can do with cables and wires
|
|