japtoy
Oviraptor
Posts: 15 
Bikes: suzuki katana 1100 yosh replica .suzuki gsx 1100ex . suzuki katana stock.suzuki gsxr1000 k 6 yosh
|
Post by japtoy on Apr 11, 2015 14:18:09 GMT
hello it s possible use a gs 1000 valves exhaust in gsx 1100 cylinder head exhaust port for take a good street racer bike because ferrea valves is very expensive with a transport coast to france thanks eric
|
|
|
|
Post by katana on Apr 11, 2015 16:45:50 GMT
Surely a two valve headed valve is going to be much larger than a 4V exhaust valve?
|
|
japtoy
Oviraptor
Posts: 15
Bikes: suzuki katana 1100 yosh replica .suzuki gsx 1100ex . suzuki katana stock.suzuki gsxr1000 k 6 yosh
|
Post by japtoy on Apr 11, 2015 17:46:07 GMT
yes but for cylinder head race 24 or 26mm it s okay for an exhaust valve  |
|
|
|
Post by katana on Apr 12, 2015 12:32:26 GMT
yes but for cylinder head race 24 or 26mm it s okay for an exhaust valve I understand the why but Vance & Hines list the GS1000 valve sizes as 38mm IN / 32mm EX and I believe the stem diameter is thicker also - so, a) there is not a cat in hells chance of fitting two of those in the chamber and b) is replacing 8 guides really cheaper than getting the correct valves + the cost of the valves and guides? |
|
japtoy
Oviraptor
Posts: 15
Bikes: suzuki katana 1100 yosh replica .suzuki gsx 1100ex . suzuki katana stock.suzuki gsxr1000 k 6 yosh
|
Post by japtoy on Apr 12, 2015 16:46:11 GMT
thanks katana i have read i think buy a ferrea valves for my project ;)or kibble valves
|
|
