Post by teaman on May 26, 2015 21:25:40 GMT
I've been researching on the possibility of fitting a mk2 front wheel on my mk1, so I can get the front wheel and tyre size to match the B12 rear end.. Straight spokes, and 120 tyre instead of 110. A complete B12 front end is just too expensive.. Also I noticed that on the bandit400, it has b12 calipers!? Though they are tokico they look real similar with the same bolt spacing. The b4 front fork wheel and discs looks identical to the ones on the b6, so maybe it would be possible to fit b4 outer tubes on the fork legs..
As for the front wheel swap, so far I've confirmed that the b6 mk1 and mk2, both shares the same front discs, right hand spindle spacer, and the spindles is also the same size.
Thought I would post this in case someone was looking for similar info.
A couple of pics:
As for the front wheel swap, so far I've confirmed that the b6 mk1 and mk2, both shares the same front discs, right hand spindle spacer, and the spindles is also the same size.
Thought I would post this in case someone was looking for similar info.
A couple of pics:
