longhair
Oviraptor
Posts: 1
Reg: Apr 18, 2013 20:56:32 GMT
|
Post by longhair on Jun 27, 2013 8:41:06 GMT
I'm looking at fitting a turbo to my bandit which has a powerscreen engine. Any suggestions on what type and make would be a help as I don't know where to start with the build, also would the engine need modding if I didn't use too much boost as I believe they are a strong motor anyway. Si
|
|
|
Post by captain chaos on Jun 27, 2013 19:43:32 GMT
if I didn't use too much boost famous last words
|
|
|
Post by katana on Jun 28, 2013 18:17:21 GMT
too much...........................................is never enough!
|
|
|
Post by mattturbocar on Jun 28, 2013 21:22:58 GMT
In an attempt to start the ball rolling with an answer. td04-15g or td04-16T From a volvo 850 T5 turbo definitely works. Not claiming its optimal but many people use them and I have heard no complaints. Have you found the turbo calculator on squirrelpf www.squirrelpf.com/turbocalc/ worth a look IMO. Matt
|
|
|
Post by nomex on Jun 29, 2013 11:46:25 GMT
TD05HR-16G-9.5/10.5 from Lancer Evolution. Should be capable for max 380hp. Has twinscroll turbine and well sized integral wastegate. Cheap to buy 300-500 €. Downside is that it (atleast I had to..) might need frame modifications to get it up enough.
|
|
cmd
Oviraptor
Posts: 2
Reg: May 16, 2013 13:41:51 GMT
|
Post by cmd on Jul 9, 2013 6:42:54 GMT
If you're looking for less than 280bhp then it's worth looking at the garrett GT22, almost impossible to find second hand, but, only £350 for a brand new genuine garret.
|
|
|
Post by nitro on Jul 9, 2013 10:01:53 GMT
Have a Garrett GT28 (size of the new GT2560R) on my Bandit. Smaller makes no sense IMO. But KKK K04 should also work great.
|
|
greybush
Velociraptor
Posts: 27
Reg: Jun 15, 2013 22:20:56 GMT
|
Post by greybush on Jul 12, 2013 22:51:18 GMT
I'm using a garrett gt2259, it was expensive but I could not be happier with spoolup. Monster torque in the midrange at 1 bar with busa pistons. Mine is 99% street and 1% drag strip.
|
|