rzkatman
Velociraptor
Posts: 25
Reg: Jun 16, 2013 0:27:49 GMT
|
Post by rzkatman on Jun 29, 2013 1:20:33 GMT
Hi guys, Thinking of fitting a 6 speed into a Banit 1200 case. Can this be done. Which shaft and gears fit best?? I have 2 750j and a 750 slab engines laying around. Which box would fit best?? One problem would be the clutch. Has anyone done this swap? I have read Frankenstein's guide. It doesn't say for sure if this can be done or not. Any info would be great. Cheers Wayne
|
|
|
Post by Del on Jun 29, 2013 15:45:50 GMT
It's been done before(the info is on the old site).I started to do a dot head 1186cc 6 speed,but had some domestic problems,so ended up getting rid of nearly everything i owned. I was using a teapot 750 head and gearbox into a powerscreen 1127 with JE 1186cc kit. Adz and Jolly roger ended up with it all.
|
|
rzkatman
Velociraptor
Posts: 25
Reg: Jun 16, 2013 0:27:49 GMT
|
Post by rzkatman on Jun 29, 2013 23:21:16 GMT
Thanks mate. How do I get onto the old site to find it???
|
|
|
Post by captain chaos on Jun 30, 2013 6:49:18 GMT
Thanks mate. How do I get onto the old site to find it??? Voodoo
|
|
gogs
Oviraptor
Posts: 12
Reg: Jun 6, 2013 21:26:50 GMT
|
Post by gogs on Jul 3, 2013 21:17:01 GMT
b4 u do this have a think u r putting 6 cogs into the space 5 cogs should b therefore the cogs will b thinner which would make them weaker do u realy need 6 gears hmmmm
|
|
|
Post by duckndive on Jul 9, 2013 4:34:00 GMT
Thanks mate. How do I get onto the old site to find it??? Voodoo THe old "Original site" is here............ oldskoolsuzuki.info/
|
|
|
Post by gpz1100convert on Jul 9, 2013 15:52:38 GMT
I'd think with a torquey motor it would be an exercise of 'because you can' than 'because you need'.
bit pointless but an interesxting technical exercise perhaps
mark
|
|
|
Post by marlin on Jul 10, 2013 22:02:00 GMT
years ago doing a track day at cadwell park . 1277 cc motor with 750 6 speed box in , going down the gooseneck into mansfield , bang clatter , wallop , ripped up gearbox , brown underpants , very expensive motor rebuild , got gears box done by cannon , cheers marlin
|
|
|
Post by jonny1bump on Jul 12, 2013 0:28:26 GMT
Gears on 6 speed not as strong with good power leave 5 speed ive got so many nakered 5 speed gearboxes that i keep getting roger to undercut, fitting quick shifter really pro longs life of box but does get lot of track use.
|
|