bikerjulia
Oviraptor
Posts: 11
Bikes: GSX 1100 ET, T595, XT550
Reg: Jun 13, 2013 19:34:09 GMT
|
Post by bikerjulia on Jul 9, 2013 8:14:38 GMT
Can someone tell me the length of a standard 11ET side stand, mine leans that far over its scary. Also does anyone know where I can get a speedo cable made, its a none standard speedo housed on the fork leg so I need a shorter cable Sorry if I have put this in the wrong section, my excuse is cos I am dizzy
|
|
|
Post by kitkatman on Jul 21, 2013 16:26:22 GMT
hi, don't have sidestand to check. find a peace of thick steel and get it welded or bolted to underneath of stand .it wil help, but they do lean over.
|
|
bikerjulia
Oviraptor
Posts: 11
Bikes: GSX 1100 ET, T595, XT550
Reg: Jun 13, 2013 19:34:09 GMT
|
Post by bikerjulia on Jul 21, 2013 18:13:45 GMT
I believe I have a 10 inch one, lucky me lol...sidestand that is. The frame has been modded hence the lean on it, I measured a big trial bike one and its about 3 inches longer so might try and get one of them or find someone who can weld this one.
|
|
|
Post by mozza on Jul 22, 2013 7:08:20 GMT
Just measured mine. From pivot pin centre to base pad is 10"
|
|
|
Post by 1260etiology on Jul 22, 2013 7:49:49 GMT
Hey Julia. I noticed that you have a T595. Try that sidestand on your ET as I fitted the side stand from my 2002 Speed Triple and it fitted perfectly and is much neater than the original.Only thing you will need is a correct length side stand spring
|
|