|
|
Post by bluedog59 on Jul 9, 2013 11:57:45 GMT
Well as far as I know, the motor's an ET. Square end caps on the rocker cover.
Could anybody tell me,
What the tappet settings are on what marks ?
How to adjust the camchain ?
Carb settings for pod K+N's or stock settings even ?
Ta.
|
|
|
|
Post by Pete750ET on Jul 9, 2013 12:10:20 GMT
I have a manual at home, will scan in some pages for you  Cam chain has a self adjuster, just back it off and rock the bike with it in gear and it should self adjust. Carb don't like pods from my experience unless you have a correction kit fitted. Manual should have the stock settings. |
|
|
|
Post by Pete750ET on Jul 9, 2013 19:15:07 GMT
Is this what you are after? Stock jet settings are: Main 112.5 Main air jet 1.7mm Needle 3rd notch Pilot jey 0.8mm Bypass jet 0.7mm Pilot screw 3.5 turns.   |
|
|
|
Post by bluedog59 on Jul 9, 2013 20:31:04 GMT
That looks just the job, thank you.
Have you got the bit about the camchain tensioner as well please ? Not had this type before.
|
|
|
|
Post by Pete750ET on Jul 9, 2013 21:39:53 GMT
|
|
