zed
Velociraptor
Posts: 38 
|
Post by zed on Jul 9, 2013 16:41:05 GMT
hi , i have just got hold of a 750 et which has a new set of pod filters which came with it , the jets in it are 112.5 i was going to put 120 mains in does this seem about right ? ps i have standard airbox that came with it but the frame has been strengthened so i can't use it . thanks in advance
|
|
|
|
Post by bluedog59 on Jul 9, 2013 17:20:53 GMT
The GSX750ET in the chop is running 132.5 main with pods and a 4 into 1 with a 50mm baffle tube. The jetting is not far off at:
Airscrews @ 1.75 turns out.
Pilots, unknown (stock) ?
Needles 1 from bottom.
132.5 mains.
It still needs fiddling with but it's ok.
|
|
zed
Velociraptor
Posts: 38
|
Post by zed on Jul 9, 2013 19:17:00 GMT
The GSX750ET in the chop is running 132.5 main with pods and a 4 into 1 with a 50mm baffle tube. The jetting is not far off at: Airscrews @ 1.75 turns out. Pilots, unknown (stock) ? Needles 1 from bottom. 132.5 mains. It still needs fiddling with but it's ok. nice one thanks . |
|
|
|
Post by bluedog59 on Jul 9, 2013 20:32:32 GMT
No problem, just remember they're a starting point.
|
|
