gsnutter
Velociraptor
Posts: 27 
|
Post by gsnutter on Jul 16, 2013 22:27:25 GMT
Hi all,
Im looking to turbo my gs 1000 and am wondering if anyone out there may have some guidance for me.
Most of all im after information on the best turbo to use, plenum sizing and any engine mods that may need doing especially to boost oil pressure if the best turbo turns out to be one with plain bearings.
At the moment the engine is standard however recently rebuilt will i need to make any improvements to make it reliable? |
|
Teresa O.
Velociraptor
Posts: 37
Bikes: Trickframed 1127, Turbo 14 and many more
|
Post by Teresa O. on Jul 17, 2013 6:25:06 GMT
blow or draw through ? The GSX-engine would make it a bit easier I'm afraid..
|
|
gsnutter
Velociraptor
Posts: 27
|
Post by gsnutter on Jul 18, 2013 22:07:10 GMT
I would really like to keep the standard engine as it will be the only original part on the bike. if i have this correct it will be a blow through meaning that the turbo will discharge into the plenum then through the carbs.
|
|
