|
Post by greasemonkey on Jan 25, 2015 10:59:39 GMT
To tell the truth. I didnt quite think it through how long 8 inch really is. But hey. It looks good.
|
|
robdog
Oviraptor
Posts: 1
Reg: Nov 12, 2014 11:57:31 GMT
|
Post by robdog on Feb 3, 2015 13:17:34 GMT
Hi Im loving the build. Did I see that your using beringer brakes? Awesome brakes for anyone tempted by them. And look really trick. Used them for years racing motard! No fade and stop so much better with the cast discs.
|
|
|
Post by greasemonkey on Feb 3, 2015 17:33:13 GMT
thx m8 unfortunately they're the stainless discs, I wasn't planning on racing it when I started the build.
grtz
|
|
|
Post by greasemonkey on Feb 14, 2015 19:44:15 GMT
Finally got cracking and got this pig on her feet. welded top and bottom mount and made some dogbones. just need to lower the front fork for an inch to get some angle in front.
|
|
|
Post by caferacerdan on Feb 14, 2015 20:03:08 GMT
Finally got cracking and got this pig on her feet. welded top and bottom mount and made some dogbones. wow...I know people say the oil cooled Suzuki engines are really weighty but this gives it a whole new meaning!
|
|
|
Post by greasemonkey on Feb 14, 2015 20:11:20 GMT
Finally got cracking and got this pig on her feet. welded top and bottom mount and made some dogbones. wow...I know people say the oil cooled Suzuki engines are really weighty but this gives it a whole new meaning! Damn sure they weigh a ton! that's 40kg and it's not nearly enough. don't plan on carrying 50 or 75 kg weights from the basement. smileycrutch
|
|
|
Post by pambos1127 on Feb 16, 2015 0:20:24 GMT
Good evening greasemonkey.do not misunderstand me for my question,you change your plan for yoshi replica? forgive me for my english is not the best good night.
|
|
|
Post by greasemonkey on Feb 16, 2015 11:32:46 GMT
Good evening greasemonkey.do not misunderstand me for my question,you change your plan for yoshi replica? forgive me for my english is not the best good night. Hi pambos. I really want to built a yoshi bike but the parts to build a accurate replica are very hard to find and very expensive. I keep looking for the parts but for now it wil be my bike and not a yoshi.
|
|
|
Post by greasemonkey on Feb 19, 2015 20:04:26 GMT
SO, about this fork stuf. How much can I lower these busa forks? I've seen someone that loweren them 4 inch, I dont think this is correct Oh, on a other note, those cartridges don't come apart easily! Got sidetracked again OH, after the debacle with my gsxf 750 and the carbs hitting the tank this happened. so I got out the BIG hammer.
|
|
|
Post by captain chaos on Jun 23, 2015 20:48:19 GMT
Bump Any progress Bert?
|
|
|
Post by greasemonkey on Jun 24, 2015 6:27:32 GMT
Bump Any progress Bert? Dag Joris. I'm still struggling with my health. The bike still sits like it does on the last pic.
|
|
|
Post by captain chaos on Jun 24, 2015 6:52:17 GMT
Dat is klote om te lezen. But on the bright side, the bike looks good as it is in the last pic.
Anyway get well soon, hope it's not too serious.
|
|